PBN type (reverse cycle type)

PBN type (reverse circulation type) use: suitable for conveying easy vaporization, the temperature is not more than 150 ℃ cleaning medium. ● Performance parameters: flow rate: ≤ 500 m3/h head: ≤ 110m power: ≤ 315kW

PBG type (water-cooled high temperature type)

PBG type (water-cooled high temperature type) ● Application: Suitable for conveying cleaning media with a temperature not greater than 350 ℃. ● Performance parameters: flow rate: ≤ 500 m3/h head: ≤ 150m power: ≤ 315kW

PKT type (air conditioning type)

PKT type (air conditioning model) ● application: suitable for air conditioning units and other occasions require lower NPSH cleaning medium transport. ● Performance parameters: flow rate: ≤ 100 m3/h head: ≤ 40m power: ≤ 22kW

PX small flow high lift pump

1. Structural features PX series small flow high lift pump for horizontal, single stage, single suction, radial split volute pump. The pump is designed and manufactured in full accordance with GB5662 standard and API610 standard eighth edition. The pump body of this series of pumps is a centerline supporting structure, with axial suction and radial discharge. The lubrication method of the bearing is thin oil lubrication, and the oil level is controlled by a constant oil cup to fully ensure that the bearing works in a good lubrication state. The impeller is a closed impeller. Most of the axial force of PX series pumps is balanced by the method of impeller drilling balance holes, and the residual axial force is borne by the bearing. Shaft seal according to the use of different conditions, you can use packing seal, single

PC standard chemical pump

1. Structural characteristics PC series chemical process pump is horizontal, single-stage, single-suction centrifugal pump, products in line with DIN24256,ISO2858,GB5662 standards. The pump body of this series of pumps is a foot support structure, which can bear the external load and directly transmit it to the foundation. The lubrication method of the bearing is thin oil lubrication, and the oil level is controlled by a constant oil cup to fully ensure that the bearing works in a good lubrication state. The impeller is a closed impeller, most of the axial force of the pump is balanced by the back blade or balance hole, and the residual axial force is borne by the bearing. According to the use of different shaft seals, you can use packing seals, single-end mechanical seals, double-ended

PS self-priming pump

1. Structural features PS series self-priming pump is based on the principle of gas-liquid mixing self-priming, using external mixing structure design. The working process of the gas-liquid hybrid self-priming pump: usually try to make a certain amount of water in the pump. After the pump is started, due to the rotation of the impeller, the air and water in the suction pipeline are fully mixed and discharged to the gas-water separation chamber. The gas in the upper part of the gas-water separation chamber escapes, and the water in the lower part returns to the impeller to re-mix with the remaining gas in the suction pipeline until all the gas in the pump and the inlet pipeline is exhausted, self-priming is completed and normal pumping is completed. 2. Performance parameter flow: 6

Agitator

In recent years, with the continuous expansion of the company's scale, in order to meet the needs of users, our company has successfully developed ST, SE, SG, YD series 300 kinds of mixers, which can meet the use requirements of high, medium and low viscosity segments. The products have many advantages such as high efficiency, reliability, convenient installation and maintenance, and are deeply trusted by users. Products are widely used in petroleum, chemical, paper, food, paint, rubber, resin and other industrial fields. Blender connection mode: Blender impeller form:

PG45KW

PG series high temperature and high pressure shielding electric pump is mainly designed and developed for the nuclear industry. The motor of this product adopts water-cooled structure design with design pressure of 20MPa and design temperature of 350 ℃. At present, our company has produced various specifications of high temperature and high pressure shielding electric pumps, with a maximum motor power of 250kW, a flow rate of 500 m3/h, a lift of 100m, a working temperature of 350 ℃ and a working pressure of 17.5MPa, which are well received by users.