PX small flow high lift pump

1. Structural features PX series small flow high lift pump for horizontal, single stage, single suction, radial split volute pump. The pump is designed and manufactured in full accordance with GB5662 standard and API610 standard eighth edition. The pump body of this series of pumps is a centerline supporting structure, with axial suction and radial discharge. The lubrication method of the bearing is thin oil lubrication, and the oil level is controlled by a constant oil cup to fully ensure that the bearing works in a good lubrication state. The impeller is a closed impeller. Most of the axial force of PX series pumps is balanced by the method of impeller drilling balance holes, and the residual axial force is borne by the bearing. Shaft seal according to the use of different conditions, you can use packing seal, single

PC standard chemical pump

1. Structural characteristics PC series chemical process pump is horizontal, single-stage, single-suction centrifugal pump, products in line with DIN24256,ISO2858,GB5662 standards. The pump body of this series of pumps is a foot support structure, which can bear the external load and directly transmit it to the foundation. The lubrication method of the bearing is thin oil lubrication, and the oil level is controlled by a constant oil cup to fully ensure that the bearing works in a good lubrication state. The impeller is a closed impeller, most of the axial force of the pump is balanced by the back blade or balance hole, and the residual axial force is borne by the bearing. According to the use of different shaft seals, you can use packing seals, single-end mechanical seals, double-ended

PS self-priming pump

1. Structural features PS series self-priming pump is based on the principle of gas-liquid mixing self-priming, using external mixing structure design. The working process of the gas-liquid hybrid self-priming pump: usually try to make a certain amount of water in the pump. After the pump is started, due to the rotation of the impeller, the air and water in the suction pipeline are fully mixed and discharged to the gas-water separation chamber. The gas in the upper part of the gas-water separation chamber escapes, and the water in the lower part returns to the impeller to re-mix with the remaining gas in the suction pipeline until all the gas in the pump and the inlet pipeline is exhausted, self-priming is completed and normal pumping is completed. 2. Performance parameter flow: 6

PMC multistage centrifugal pump

1. Structural features (I) bearing parts★The radial thrust ball bearing with the non-driving end is designed in combination with the radial bearing, and the radial bearing at the driving end is designed to ensure the bearing capacity and avoid the bearing heating phenomenon.★The bearing inner sleeve design method avoids the bearing being directly installed on the shaft, and the mating radial thrust ball bearing can be easily disassembled during maintenance.★The design of the large oil tank ensures that the heat generated by the bearing is diffused in time.★The oil slinger design ensures good lubrication of the bearings.★The heat sink outside the bearing chamber increases the heat dissipation effect.★Cooling pipes can be installed in the oil tank to directly cool the lubricating oil in the bearing chamber, which is different from the traditional